You have to use the servo wire with a JST connector to connect the tactor to the home module (or it will lead to a short circuit 🤯 ) The colors of the wires also need to be matched
Once you click the "ACTIVATE" button for the tactor you want to try (on the Tactor Information page), the blue color LED for the corresponding connector port will light up. You don’t need to find the port manually.
The JST connectors are assembled by hand, which may get damaged if you only pull the wires to take them off. Please use the pry tool :)) We have a demo video in the detailed tutorial.
You will receive your account information from our email. Please remember to log in to your account when you are using the system. With the default account, you can play with the system but will not be able to save the touch patterns you design.
"ranzhou" is the example account for the demo.
Connect the home module to the PC with the USB cable.
You can also refer to the Home Connection tab ******on the Connection page in TactorBots App